Stepping Spray Line – SSL 3060

This line is used for complete gluing of small (up to 150/150mm) leather details and other
ancillary materials used in the leather industry. Using this line water based glue is applied
over the entire area of the details and subsequently the glue is activated in a drying
module, the parts are glued together and pressed on rotary presses.
The main advantage of this line is the establishment of continuous process in the gluing
details operation. The continuous flow system ensures high performance of the overall
technological process by reducing the dead times for delivery of workpieces from one
operation to the other within this technological process.

Main technical parameters
  • Size of the unit – width 800mm /without working places/, length 2700 мм
  • Supply – 3×380 V/50Hz
  • Consumed power – 2.5 kW
  • Working width of the line 600 мм
  • Feeding area – 300/600 мм
  • Spraying area – 300/600 мм
  • Drying area 300/600 мм
  • Gluing area – width 600 мм, length 1800
  • Band speed adjustable between 3 m/min to 10 m/min
  • Spraying speed between 0.1 m/min to 90 m/min
  • Built-in aspiration with flow rate 300 m3/h
  • Adjustable dryer power from 5% to 100% with forced ventilation
  • Width of applied glue (trace) from 50 mm to 100 mm
  • Adjusting the air flow of the spraying system
  • Adjusting the amount of glue sprayed
  • Working places for gluing together from 2 to 4.
  • Number of rotation presses from 2 to 4
  • Two independent glue rings
Brand

PL Project

Category:
USABulgaria